RX-8

The development of the RX-8 can be traced as far back as the 1995 RX-01 concept car, which featured an early iteration of the 13B-MSP engine. Naturally aspirated with side exhaust ports, this engine has a power output of 210 hp (157 kW). Because of Mazda's financial position at the time and the growing market interest in SUVs, the RX-01 did not see further development or production. However, a "skunkworks project" engineering team within Mazda kept the development of the 13B-MSP alive using an elongated MX-5 chassis known internally as "gokiburi-ka", or "cockroach car" translated to English, eventually catching the attention of management, which was by then heavily influenced by Ford. Development of the 13B-MSP advanced and eventually led to the RENESIS name debuting along with the RX-EVOLV concept car which began to bear semblance to the production version of the RX-8 with the "freestyle" rear suicide doors. The styling was further refined, in Mazda tradition, by competition between its design studios in Japan, the US, and Europe. The lead designer was Ikuo Maeda, the son of Matasaburo Maeda (the lead designer of the original RX-7).The project obtained official approval from management under one condition, that the resulting car should have four doors, and eventually the RX-8 concept car (design/engineering model) was produced and shown in 2001, closer resembling the production version. A near-production "reference exhibit" RX-8 was shown shortly thereafter at the 2001 Tokyo Motor Show, pending final approval for production. The production version of the RX-8 closely resembles this vehicle save for minor trim details, and "Job 1" began in February, 2003 at Mazda's Hiroshima plant in Japan.

The RX-8 was designed as a front mid-engine, rear-wheel-drive, four-door, four-seater quad coupé. The car has a near 50:50 front-rear weight distribution and a low polar moment of inertia, achieved by mounting the engine behind the front axle and by placing the fuel tank ahead of the rear axle. The front suspension uses double wishbones and the rear suspension is multi-link. Weight is trimmed through the use of materials such as aluminum and plastic for several body panels. The rest of the body is made of steel, except for the plastic front and rear bumpers. The manual gearbox model uses a carbon fiber composite driveshaft to reduce the rotational mass (momentum of inertia) connected to the engine. Power is sent to the rear wheels through a torque-sensing conical limited-slip differential for improved handling. While underpowered in comparison to the final variant of the RX-7 the RX-8 is considered its successor as Mazda's rotary engine sports car.

A prominent feature of the RX-8 is its rear-hinged "freestyle" doors (similar to suicide doors) that provide easier access to the rear seats. The RX-8 has no B-pillars between the front and rear doors, but the leading edge of the rear door acts as a "virtual pillar" to maintain structural rigidity. Because of the overlapping design, the rear doors can be opened only when the front doors are open. The RX-8's cabin was designed to allow enough room to house four adults, making it a genuine 4-seater rather than a 2+2. In designing the RX-8, Mazda's engineers were able to achieve a chassis stiffness rating of 30,000 Nm/deg.

RX-8 Nemesis (This one Pictured in our Showroom)

The 'Nemesis' model is the third special edition model launched as a UK exclusive. It was launched in 2006, although some cars were registered in 2007 due to stock runoff. The 'Nemesis' features unique paint colors and interior trim, plus an exclusive accessory package, at a cost that was at the time £330 less than the model on which it is based – when similarly specified. Based on the standard 189 hp (192 PS; 141 kW) version of the Mazda RX-8, it included a unique stone leather seat trim interior and came with a five-speed manual transmission. The Nemesis has several other unique exterior and interior features. Two exclusive colors were available, Copper Red Mica and Stormy Blue Mica, each Nemesis also comes with a polished aluminum Rotary crest on the front air dam, polished aluminum side air-outlet trims behind the front wheel arches, special B-pillar trims with a Rotary crest and 'Nemesis' badging. Inside, these special edition models also featured Nemesis branded luxury carpet mats and Mazda RX-8 branded aluminum door scuff plates. Like other standard 245 hp (183 kW; 248 PS) RX-8s, the Nemesis has front fog lights, heated front seats, electrically operated driver's seat, climate control air-conditioning, nine-speaker BOSE premium audio system with 6-CD auto-changer, plus a black leather-wrapped steering wheel, gear knob and hand-brake lever. The Nemesis has a top speed of 139 mph (224 km/h) and accelerates from 0 to 60 mph (97 km/h) in 7.2 seconds. Each Nemesis buyer also qualified for a complimentary Prodrive experience day. Just 350 examples were built, 200 in Copper Red and 150 in Stormy Blue.

DA56 XWF

This particular RX-8 Nemesis was purchased at Warrington Mazda Brand new by a local couple in 2006, and has only covered just over 13,000 miles, and has been serviced every year and even by the same technician at Warrington Mazda, when in 2019 Warrington Mazda purchased back the RX-8 to display in our showroom.

Next time when you in the area and wanting to purchase a new or used Mazda feel free to look at this RX-8

Click here to view or current offers on new Mazda's